920-460 Exam

Quality and Value for the 920-460 Exam

just4study Practice Exams for Nortel 920-460 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 920-460 Exam

If you prepare for the exam using our just4study testing engine, we guarantee your success in the first attempt. If you do not pass the NCSS 920-460 exam (ncse wireless lan) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

Nortel 920-460 Exams (in EXE format)

Our Exam 920-460 Preparation Material provides you everything you will need to take your 920-460 Exam. The 920-460 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

920-460 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Nortel 920-460 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 920-460 Exam:100% Guarantee to Pass Your NCSS exam and get your NCSS Certification.
　
　
Exam : Nortel 920-460
Title : NCSE Wireless LAN
Version : Demo


1. A customer is deploying a new WLAN using the adaptive solution. Because the network is small, the customer will be placing Nortel Access Port 2230s and Security Switch 2270s on the same Baystack 460. The customer would like three separate VLANs in order to segregate traffic on the network. The Ethernet port connected to the 2270 has been configured as a tagged port with all three VLANs. Each port connected to the 2230s is configured for VLAN 1 (untagged). The customer is concerned that they cannot route traffic between the VLANs. What is needed to allow routing between the VLANs?
A. Static routes must be configured in the 2270.
B. The ports to the access ports should be configured for all VLANs as well.
C. An IP based VLAN should be used on the 460 instead of a port based VLAN.
D. A router should be placed on the switch and the link configured as a tagged port for all 3 VLANs.
Answer: D

2. A customer site has deployed 300 Nortel 2210 handsets. The network has a single 2245 IP Telephony Manager. The customer has concerns that their users are not able to make calls randomly at certain times of the day. However, if the users make several attempts to make a call during this period they can usually get though. You go to the site during off hours and cannot reproduce the problem. What is causing the issue?
A. The network needs more access points.
B. The firmware on the 2210 handsets needs to be updated.
C. The firmware on the 2245 IP Telephony Manager needs to be updated.
D. The site needs more than one 2245 IP Telephony Manager to support the number of clients.
Answer: D

3. A customer has just installed a new Voice over WLAN solution using a 2245 IP Telephony Manager and several Nortel 2211 handsets. The customer says that they have recently obtained the latest firmware for their 2245 and have configured a local TFTP server, enabled it, and placed the latest software files in the root directory. When they boot the 2245, the TFTP server sees no activity. Which configuration set has been overlooked?
A. The name of the new firmware file should be configured in the 2245.
B. The IP address of the 2245 should be configured in the TFTP server.
C. The IP address of the TFTP server should be configured in the 2245.
D. The name of the new firmware file should be configured in the TFTP server.
Answer: C

4. A client is deploying a Nortel WSS 2250 for their wireless network. There are five wireless subnets attached to the network. There is a router behind the WSS 2250. The client has configured RIPv2 on the router to share routing information with the 2250. However, the router is not receiving RIP updates. What is the issue?
A. RIP listening is not turned on at the router.
B. The 2250 does not support RIP, use static routes instead.
C. The 2250 only supports RIPv1, the router should be configured accordingly.
D. The customer has not configured RIP on the 2250. Enable RIP from the CLI.
Answer: B

5. A network using an adaptive solution is configured to support both a voice network and a data network. There are two WLANs configured on the Nortel 2270 -- a voice WLAN named 'voice' and a data WLAN named 'data'. The users are experiencing the following issues: ?Users at the office are not required to statically enter SSIDs. ?A user can use the Nortel 2211 handset to work from an office desk, but cannot get a laptop using a Nortel 2201 wireless adapter to connect from that same area. ?The laptop can connect without a problem from other areas in the building. What would be a reasonable cause for the issue?
A. The access port in that area is configured to only support VoIP devices.
B. The connection from the 2211 handset is interfering with the connection from the 2201.
C. The access port in that area only supports 802.11b while the 2201 wireless adapter does not.
D. The 'data' SSID is not being advertised on the access port in that area while the 'voice' SSID is.
Answer: D

http://www.Just4study.com The safer.easier way to get NCSS Certification.